To better enjoy the SMO 4K camera, we highly recommend using it on the new pusher whoop drone - Beta95X V3 Whoop Quadcopter and Beta95X V3 HD Digital VTX.
SMO 4K Camera is an ultralight action camera that is specially designed for FPV drones. Developed by BETAFPV using Insta360 technology, it only weighs 30g and can be easily mounted on a variety of FPV drones including micro cinewhoop like Beta95X V3, 3-4'' ducted quads, 4-5'' long-range FPVs and fixed-wing FPVs.
With SMO 4K camera's 4K wide-angle shots and FlowState stabilization function, pilots can shoot 4K wide-angle video with greater detail, smoother stabilization and better dynamic range.
Support using the radio transmitter to control SMO 4K Camera on power on/off and start/stop recording remotely, making it more convenient to operate.
UV filter and ND16 filter are both provided in the package. ND filters not only can prevent the issue of jello generated in the insane flight but also acts as a lens protector. Meanwhile, if pilots are flying indoors or at dusk, the UV filter would be your best choice to protect your lens.
The power supply range is 6V-27V, supporting 2-6S Lipo batteries. With the 4-pin pluggable connector, pilots can easily connect the SMO 4K with your flight controller for power supply and recording.
Item: SMO 4K Camera
Power supply range: 6V-27V (2S-6S Li-Po battery)
Lens aperture: F2.8
35mm equivalent focal length: 16.4mm
Video resolution: 4000x3000@24/25/30fps, 3840x2160@24/25/30/60fps, 2720x1530@24/25/30/60/100fps, 1920x1080@24/25/30/60/120/200fps
Video format: Mp4
Video code: H.264 / H.265
Video mode: Normal, HDR, Timelapse, TimeShift, Basic stabilization (in-camera), Pro stabilization (export with Insta360 app/Studio to apply FlowState stabilization)
Video maximum bit rate: 100Mbps
Wi-Fi: 5G (standard range approx. 2m)
Micro SD card: UHS-I V30 speed class, exFAT format SD cards with a max storage of 1T are recommended
Operating environment: -20°C ~ 40°C
4K Wide Angle
With the SMO 4K action camera, pilots can shoot 4K wide-angle video with greater detail, smoother stabilization and better dynamic range. SMO 4K also can shoot 4K footage with a new ultra-wide FOV option in Insta360 Studio that removes distortion from your shots. In addition, a 100mbps bitrate and H.265 encoding deliver crisp details.
No More Jello Effect
By using the ND16 filter, it can prevent the issue of jello generated in the insane flight. An ND16 filter also acts as a lens protector which can protect your lens while your drone meets a serious crash. In addition, when you fly indoors or at dusk, you can use the UV filter to protect your lens. ND16 filter and UV filter are both provided in the package.
The camera comes with a 6V to 27V power connector that supports 2S to 6S LiPo FPV batteries. Just plug in and go. Pilots can easily connect the SMO 4K with your flight controller for power supply and recording. You can also connect the camera to your flight controller to start and stop recording remotely without having to stop flying.
Please notice that the SMO 4K indicator light has some differences from the user manual. The specific LED status is as follows.
When SMO 4K mistakenly detected that it is not charged with a battery, the LED status is blue;
When SMO 4K mistakenly detected that it is charged with a battery, the LED status is red.
Both conditions will not affect the performance of SMO 4K. Please refer to the table below for the correct camera LED status.
|SD card error
|Power on & SD card is normal; Battery signal detected
1 * SMO 4K Camera
1 * Spare Camera Bottom Cover
2 * SH1.0 4-Pin Power Cable
1 * Transparent UV Filter
1 * ND16 Filter
1 * Screwdriver
2 * Spare Screws for Camera Bottom Cover
1 * Pack of Camera Mounting Screws and Nuts
1 * User Manual