Hobbywing QuicRun WP 1080 G2 Brushed ESC Speed Controller 80A/400A for 1/10 Rc Car Rock Crawler
$39.90 USD
Hobbywing QuicRun Waterproof 1080 G2 Brushed ESC (2-3S) Speed Controller for 1/10 Rock Crawler; Features with "Real Car Mode" in brushed system Water-proof and dust-proof for all-weather Rack Crawler application;
Recommend application: (NOT INCLUDED)
Motors: 540 & 550 Size Brushed Motors
15 Programmable Items let's drivers easily tune their vehicle with the LED Programming Box connected to the programming port.
Specification:
IP67 Standard for being waterproof and dust-proof for various weather conditions, and driving surfaces.
Note:
The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level.
Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging.
The BEC Upgrade includes maximum output to 6A and provides 6V/7.4V/8.4V output options to support most of the servos on the market.
The New design reduces operating temperatures of the ESC by about 15 degrees improving reliability.
The ESC also has a fan mount to meet additional cooling needs.
Adjust the drag brake force in real time! With the Drag brake Force Signal connected to an open channel on the receiver, users can adjust the drag brake force on the fly with out the need to connect the Programmer. (Requires open channel on receiver)
Four running modes available
Fits a variety of control habits and control needs
Real car mode.
The direction of the motor is switchable in real time by using the idle channel on the transmitter.
Pull the trigger for "forward" Push the trigger for "brake"
Pull the trigger with the "reverse channel" on will give you "reverse" (Requires an open channel on the receiver)
This new feature will provide the user with a unique experience unlike any other.
Package include:
1 x Hobbywing QuicRun WP-1080 G2 ESC
Recommend application: (NOT INCLUDED)
Motors: 540 & 550 Size Brushed Motors
15 Programmable Items let's drivers easily tune their vehicle with the LED Programming Box connected to the programming port.
Specification:
Item Number: | 30120202 |
Application: | 1/10 Rock Crawler |
Model: | 1/10th Scale Brushed Waterproof Speed Controller |
Cont./Peak Current: | 80A/400A |
Input Voltage: | 2-3S Lipo; 5-9S NiMH Battery |
BEC Output: | 6V/7.4V/8.4V @4A, 6A Peak |
Input Wires: | Black-14AWG-200mm / Red-14AWG-200mm |
Input Connectors: | XT60 Connectors |
Output Connectors: | 4.0mm Bullet Connectors (Female) |
SET Button on ESC: | Supported |
LED Program Box: |
Supported |
LCD G2 Program Box: | Not Supported |
OTA Programmer: | Not Supported |
Program Port: | Separate Program Port |
Firmware Upgrade: | Not Supported |
Size: | 37.2 X 31.9 X 18.4mm |
Weight: | 70.2g (w/Wires) |
IP67 Standard for being waterproof and dust-proof for various weather conditions, and driving surfaces.
Note:
The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level.
Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging.
The BEC Upgrade includes maximum output to 6A and provides 6V/7.4V/8.4V output options to support most of the servos on the market.
The New design reduces operating temperatures of the ESC by about 15 degrees improving reliability.
The ESC also has a fan mount to meet additional cooling needs.
Adjust the drag brake force in real time! With the Drag brake Force Signal connected to an open channel on the receiver, users can adjust the drag brake force on the fly with out the need to connect the Programmer. (Requires open channel on receiver)
Four running modes available
Fits a variety of control habits and control needs
Real car mode.
The direction of the motor is switchable in real time by using the idle channel on the transmitter.
Pull the trigger for "forward" Push the trigger for "brake"
Pull the trigger with the "reverse channel" on will give you "reverse" (Requires an open channel on the receiver)
This new feature will provide the user with a unique experience unlike any other.
Package include:
1 x Hobbywing QuicRun WP-1080 G2 ESC