Jumper T18 / T18 Pro is a new radio transmitter with a number of improvements based on Jumper T16 Pro V2
1. New IPS 480*272 Screen
2. Carbon Fiber Style Faceplate
3. New internal multiprotocol module JP5in1, with 915 MHz long range module, support Frsky R9 915MHz long range receiver system, with included external antenna
4. Touch screen interface reserved inside the T18 / T18 Pro transmitter for future update.
5. Newly improved hall sensor gimbals for T18 based on T16 Pro V2, and ALPS RDC90 sensor (which is used by Futaba T18MZ) for T18 Pro transmitter.
6. No more ribbon cables! Simple and reliable connection between the radio components means no more problems with switches or roller stop working.
Mode 2 (Left hand throttle)
Mode 1 (Right hand throttle)
The T18 / T18 Pro is a full size multi protocol radio that runs the open source OpenTX. Both version now includes a built in TX module freeing up the back slot for a long range system such as TBS Crossfire, and added module into JP5in1 915Mhz Long Range System Receiver, with external 915Mhz Antenna included.
Weight: 798g (with 2 x 18650 batteries installed, not included)
Battery: 2 x 18650 (tray supplied) or 2S lipo (batteries not included)
Current: 350mah (NO CRSF)
Industrial grade 4.3 inch IPS 480*272 outdoor readable color screen
Wheel menu button
Angle adjustable ultra-smooth dual bearing gimbals
Multi-protocol transmitter module with TBS CRSF support
Memory 16M (can be expanded by TF card)
Vibration reminder function
Standard JR module slot
6-Flight Mode Buttons (for APM and Pixhawk flight controllers)
Two-color LED status display
Jumper JP5-in-1 Module
The Jumper JP5IN1 Module features the CC2500, NRF24L01, A7105 and CYRF6936 RF Chip modules all integrated on one board, with added 915MHz Module. This module can convert standard PPM signals form module equipped radios in to the RF protocols used by most radios in the market today (See RF Chip data below), and works with Frsky R9 long range receiver system.
This module is plug and play with module equipped radios in the FrSKY series and requires no complex wiring or “hacking” to get running.
The module is a great way to improve the enjoyment of your flying experience, using a better radio such as the FrSKY Taranis series rather than the low grade radios commonly included with most kits offers an night and day difference in performance. The Jumper JP5IN1 module is also upgradable via USB input
Working voltage: 6-9v
Working current: <=100ma
Operating frequency: 2.4G ISM band
RF power: +22DBM
Main control chip: STM32F103CBT6 (128K ROM, 20K RAM)
Module bay compatibility: Frsky, Frsky R9, Jr and other dimensions: 64*49*33 (without antenna)
Net Weight: 42g (including antenna)
Software Compatibility: Suitable for radios using OpenTX or er9x/ersky9x
Firmware updatable: Yes, via USB.
RF Chip Data
Cypress Semiconductor CYRF6936: DSM/DSMX, Walkera Devo
Texas Instruments CC2500: FrSky, Futaba SFHSS
Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan
Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN and most other Chinese models
1x Jumper T18 /T18 Pro Radio Transmitter
1x Li-Ion Battery Tray
1x USB Cable
1x Neck Strap
1x Screen Protector