HOBBYMATE Flash Hybrid 5" FPV Racing Drone Kits / Pnp / Bnf, 215mm Platform Carbon Fiber, Support 4-6S Lipo Power

HOBBYMATE Flash Hybrid 5" FPV Racing Drone Kits / PNP / BNF

Note:
Kits comes with frame, electronics parts exc. receiver, not assembled.
PNP version will be pre-assembled, without receiver installed.
BNF version will be assembled with receiver which is compatible with Frsky Radio and Jumper transmitter.

*Important notice to customers, when you run 6s with the drone, please make sure you set up throttle limit on your radio transmitter, or set up in betaflight.

- Kits building Video and Configuration of flight pack

CultureFPV Review Video:

Frame Spec:

-215mm 5" Racing Platform
-Full 3k carbon fiber twill
-6mm arms, 2mm plates
-Camera protection
-Ultra Small Profile
-Lightweight designed and durability
-19*19mm mounting size camera only

Specifications
-Airbot OMNIBUS F4 V6 flight controller
-Airbot Furling32 F3 4in1 BLHeli_32 ESC 45A
-Hobbymate Motors: 2207+ 2250Kv support both 4-6S power
-25-600mw switchable 48ch VTX support Smart Audio
-Caddx Turbo Micro SDR2 fpv racing camera
-Foxeer Lollipop 3 2.5DBi 5.8G Super Mini Antenna

Assembly Diagram Download Here

Hobbymate 2207+ FPV Racing Competition Motor

Click here for more details

KV: 2250KV 4-6S

Version: CW Screw Thread
Configuration: 12N14P Stator Diameter: 22mm

Newest version airbot F4 V6
-Omnibus Fireworks firmware (OMNIBUSF4FW target)
-5 UARTS
- Betaflight OSD
-5V1A BEC on board(3-6s) and 1x 8V BEC for Camera/VTX
-MPU6000 at SPI bus, Ext, SPI for damped gyro
-SBUS/PPM input (Pinheaders)
-6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)
-Barometer BMP280
-36x36mm, mount holes 30.5x30.5mm

Airbot Furling32 4in1 45A ESC

New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed.

Supports up to 55A burst and 45A continued.

Features:

• 32bit ESC with BLHELI32 firmware
• Supports 3-6S lipo input
• PWM input, TLM supported
• Voltage output (VBAT)
• NO BEC
• Supports oneshot / Multishot / Dshot PWM
• Mounting holes 30.5x30.5mm
• Supports damped light
• F3 MCU, runs double faster than F051
• Extra Cap needed for high current or 6s usage

VTX
-Input Voltage: 7-24V DC (6s compatible)
-Frequency: 5.8G
-Channel: 48 (including RaceBand)
-Channel Select button
Video Format: NTSC / PAL
Power Transmission: 0mW / 25mW / 200mW / 400mW /600mW Switchable
Size (mm): 36 x 36 x 5mm
Weight: 6g (Does not contain antenna)
Connector Type: MMCX Connector
Connector Type of Cable: SMA
Smart Audio Protocol: IRC Tramp

RX:

HOBBYMATE Full range receiver D16 mode compatible with Frsky Radio Transmitter, Jumper T16 Transmitter

https://hobbymatehobby.com/products/full-range-s-bus-receiver-16-ch-support-lua-script-w-s-port-telemetry-2

Connection wire diagram for Vtx, Receiver