FlySky FRM302 2.4GHz Long Range Radio Module System for Flysky Paladin, Nirvana NV14, Jumper T16 T18, Frsky X9D and More Radio Controller With JR Type Module Bay
Flysky FRM302 module provides the RF power output from 20dBm (100mW, EU regulations) up to the 33dBm (2W, non EU). The maximum range is achieved in the maximum RF power mode. In order to get this power output module need to be powered from the external power source. There is an XT30 socket for that. Module supports wide range of input voltages (5-28V)
FRM302 module has button with a LED ring that is used as Bind button if the module is connected via PPM. If the module is in UART mode then binding should be made from radio menu. LED indicator also shows the status of the module.
There is a build in fan that turns on automatically if the module temperature reaches 45℃
Online updates firmware
Flysky is using Semtech SX1281 2.4GHz LoRa chip in the FRM302 module. This explains the great range they manage to achieve. The rc hobby world third Long Range system in the market besides TBS CRSF and FrSky R9.
Flysky FRM302 natively works with NV14 (Nirvana) and PL18 but also work with almost any radio, that has PPM output and JR module bay.
Specifications:
Wireless frequency: 2.4GHz
Transmission power: <20dBm (EU), <33dBm (FCC) *requires external power
Wireless protocol: AFHDS 3
Range: >3.5km (EU), >50km (FCC)
Delay: <10ms (UART mode)
Antenna type: external single antenna
Power: 5-28V
Data port: PPM / UART
Temperature range: -10 ℃ — + 60 ℃
Online Update: Yes
Dimensions: 64.2 * 48.5 * 33mm (JR module size)
Weight: 73.3g
Built for: PL18, FS-TH9X, NV14
Online Update: Yes
Dimensions: 64.2 * 48.5 * 33mm (JR module size)
Weight: 73.3g
Certification: CE, FCC ID: N4ZFRM30200
Binding:
UART: If using UART binding must be done using the transmitters bind function.
PPM: If using PPM the modules bind button can be used to initiate the binding process.
-The status indicator will flash green quickly when the module is in bind mode.
- When the status indicator turns solid green the module has bound successfully.
- If the status indicator is slowly flashing blue it means the module is not bound.
- Before binding make sure that the FRM302 module is installed correctly.
- In two-way mode, the RF module only remembers the last receiver bound. If more receivers are required put the transmitter into single direction mode.
Package include:
1 x FRM302 Module
